Ⅰ

Ⅱ

一、 Condensation slicer liquid raw materials that heat, is it transfer to roller material in equipment rotate and glue bringing in the trough to cool in stainless steel, cut into slices it to the anterior adjustable type slicer device , thus the liquid finished is cooled the razor blade to change into firmly , body stretches of material, can is it turn to liquid into raw materials of crystalline solid cut into slices to cool. Used in such trades as chemical industry , pharmacy ,etc. extensively. Through the raw materials of slicer shaping, than other crushing type raw materials processed, improve the grade of the products even more. And, the stability of the equipment is good , easy to operate, the characteristic that the thickness , output of cutting the material into slices can follow raw materials , transfer to the simple speed , speed of charge-in and decide. The specification of the slicer can follow the customer's quantitative customization . The technical force of our factory is rich, the experience made and studying for many years. Welcome to guidance ！

二、 Install and operation sequence ：
　　1. Check first whether the equipment is damaged , and then install and put in place.
　　2. Connect the pipeline which transports the supplies with import of the slicer well, obey and put and regulate the valve on the charge-in pipeline.
　　3. Transfer to two roller top-quality to is it connect according to enter water and is it connect well to surface to cool , electrical machinery and electric heater install well.
　　4. Start the machine and check whether it is normal to operate, then set the slicer and interval transfered to the roller.
　　5. Put through the charge-in razor blade of the cooling water , according to cutting the speed that the thickness regulates charge-in into slices, whether checking the thickness cut into slices and other demands could reach the demand . Slicer device suitable to adjust to transfer to roller have no interval.
　　6. The solidifying point of the general normal supplies is above 50 degrees Centigrade, can adopt the running water to cool , if the solidifying point is low, need to dispose the freezing equipment , cool the faster, the higher the output is.

 Crystallization slicer data detail of the condensation ：